Add：No.434 HuBin North Road,Niutang,
Wujin District,Changzhou,Jiangsu Province
Consulting service hotline
Tourist sightseeing small train manual tire changing skills and methods
Step 1: Loosen the screw cap and raise the tourist train. If the rim has a lid, you must first remove the lid, so you can see that there are several screw caps on the rim. Use a wrench to loosen it slightly (just loosen it slightly, do not unscrew the screw cap as a whole, as this may cause the wheel to suddenly come loose and the vehicle may be tilted due to loss of balance). After completion, the body is raised with a jack. Generally, there is a beam at the bottom of the car with two notches on it. The position of the jack is between the two notches.
Step 2: Loosen the screw cap and remove the tire. Since the screw cap has been loosened when the tire touches the ground, it is easy to remove all the screws and take off the tire after the vehicle is raised.
Step 3: Put on the new tire, screw on the screw cap and put the new tire on the original position, and tighten the screw cap slightly in the diagonal order to ensure that the force of each screw cap is relatively average.
Step 4: Lower the body, tighten the screw cap, lower the body, remove the jack, and tighten the screw caps in the diagonal order. At this time, the screw cap should be tightened with a large force to ensure that the tire does not fall off during driving.
1. Always pay attention to check the spare tire to see if it leaks, and always rotate the tire.
2. In order to facilitate storage, the length of the spare tire of some tourist sightseeing trains will be three to 40% narrower than the normal tires. These spare tires can only solve the temporary need for a puncture, and must be fitted with a normal-width tire as soon as possible.
How to buy a track train